Huawei Router Login

Huawei is one of the world’s largest networking equipment manufacturers, producing consumer Wi-Fi routers, 4G/5G mobile hotspots, and fibre ONT devices. Their networking products are widely deployed across Asia, Europe, and the Middle East.

How to Login to Your Huawei Router

Huawei routers use 192.168.8.1 as the default IP address — a deliberate departure from the 192.168.1.1 used by Linksys, Netgear, ASUS, and most retail-channel brands. Both addresses sit inside the 192.168.0.0/16 block reserved for private networks by the Internet Engineering Task Force in RFC 1918 (1996). Choosing the .8.1 subnet differentiates Huawei consumer gear from any upstream router on the same physical link, which matters in markets where households often have an ISP-supplied gateway plus a Huawei router behind it. Open a browser on any device connected to the router’s network and type that address in the address bar. Unlike brands that offer a branded URL alias, most of these routers rely on the IP address directly for admin access.

Whichever IP your unit uses is the network’s default gateway — the address client devices send traffic to when the destination is outside the local subnet. Huawei fibre ONTs deployed by TM Unifi and other Asian fibre providers use 192.168.100.1 instead of 192.168.8.1. The OptiXstar HG8141XR-10 FTTR Main Hub uses yet another IP, 192.168.1.254. Always check the device label before assuming.

The login page displays a single password field on newer models or username and password fields on older ones. Enter admin for both fields if you have not changed them. After logging in, you reach the home dashboard showing internet status, connected devices, and quick links to Wi-Fi settings.

On first boot, the setup wizard appears instead of the login page. Complete the wizard to configure your connection, Wi-Fi, and admin password. Subsequent visits to 192.168.8.1 show the standard login page.

Mobile hotspots like the E5576 and E5785 share the same gateway. Connect to the hotspot’s Wi-Fi (credentials are printed inside the battery compartment), then open 192.168.8.1 in your browser.

Huawei Default Credentials by Model

Model	Default IP	Username	Password	Notes
WiFi AX3	192.168.8.1	admin	admin	WiFi 6, Gigahome chipset
WiFi AX3 Pro	192.168.8.1	admin	admin	WiFi 6, quad-core
AX3000	192.168.8.1	admin	admin	WiFi 6, NFC onboarding
E5576	192.168.8.1	admin	admin	4G LTE mobile hotspot
E5785	192.168.8.1	admin	admin	4G+ Cat6 mobile hotspot
HG8145V5	192.168.100.1	root	admin	ISP fiber ONT, IP varies
OptiXstar HG8141XR-10	192.168.1.254	admin	See label	FTTR Main Hub, WiFi 6, GPON (TM Unifi)
OptiXstar K662d	192.168.1.x	admin	See label	FTTR Satellite Hub, WiFi 6 mesh, fibre upstream
B535	192.168.8.1	admin	admin	4G CPE router
WS7100	192.168.8.1	admin	admin	WiFi 6, mesh support

Most consumer routers from the brand share the 192.168.8.1 gateway. ISP-provided ONT devices like the HG8145V5 may use 192.168.100.1 with ISP-specific credentials.

Setting Up a Huawei Router

Connect the WAN port to your modem or ONT using an Ethernet cable. Plug in the power adapter and wait about 60 seconds for the indicator light to turn solid. Connect to the default Wi-Fi network printed on the bottom label, typically formatted as HUAWEI-XXXX.

Open a browser and go to 192.168.8.1. The Quick Setup wizard launches on first access.

Step 1: Select your internet connection type. The router auto-detects DHCP connections. If your ISP uses PPPoE (common with TM Unifi and similar providers), enter the PPPoE username and password provided by your ISP.

Step 2: Configure your Wi-Fi network. Set the SSID name and password for both 2.4 GHz and 5 GHz bands. These routers support band steering, which presents a single SSID and automatically moves devices to the optimal band. Enable this for a simpler network experience.

Step 3: Set the admin password. This password protects the 192.168.8.1 settings interface. Choose something different from your Wi-Fi password to maintain separate security layers.

Step 4: Review your settings and click Save. The router applies the configuration and restarts Wi-Fi. Reconnect using the new SSID and password.

After setup completes, run a broadband speed test from a wired client to confirm the router is delivering the throughput your ISP plan promises. If results are 30%+ below your plan, the issue is usually wireless signal, outdated firmware, or an ISP-side limitation rather than the Huawei itself. On TM Unifi fibre, the typical bottleneck is the ONT-to-router handoff, not the Huawei AX router downstream of it.

Changing Your Huawei Wi-Fi Password

Log into the admin panel at 192.168.8.1. Go to My Wi-Fi or WLAN Settings depending on your firmware version. You will see fields for both the 2.4 GHz and 5 GHz networks.

Click the password field for the band you want to change. Enter a new password with at least 8 characters mixing letters, numbers, and symbols. Select WPA3-SAE if all your devices support it, otherwise stick with WPA2-PSK for compatibility.

Click Save. The router briefly disconnects all Wi-Fi clients. Reconnect each device using the updated credentials. For a detailed walkthrough covering all brands, see the change Wi-Fi password guide.

The AI Life app also lets you change the Wi-Fi password from your phone under Wi-Fi Settings.

Huawei NFC Onboarding and HarmonyOS Mesh

Routers with NFC support (AX3000 and newer) let Android phones with NFC connect to Wi-Fi by tapping the phone against the router. No need to type the Wi-Fi password manually. This feature works with any NFC-enabled Android device, not just Huawei phones.

For larger homes, the company offers HarmonyOS Mesh. This feature lets you pair multiple compatible routers into a mesh network with seamless roaming under one SSID. The primary router manages all nodes. Add a mesh node by placing it within range of the primary router and pressing the H button on both devices. They pair automatically.

HarmonyOS Mesh supports both wireless and wired backhaul. Wired backhaul via Ethernet between floors provides more consistent speeds. The mesh system prioritizes 5 GHz for wireless backhaul, keeping 2.4 GHz free for client devices.

Common Huawei Login Typos

Several misspellings of 192.168.8.1 and the Huawei admin URL fail to resolve. Here is what each one really means:

• 192.168.8.l (lowercase L instead of 1) — common typo. The address is 192.168.8.1 (numeric one).
• 192.168.B.1 (letter B instead of 8) — replace the B with 8. IP addresses are all numeric.
• 192.168.1.1 — wrong default for Huawei consumer routers. Linksys/Netgear/ASUS use that address. Huawei consumer gear uses 192.168.8.1.
• 192.168.l00.1 (lowercase L instead of 1) — typo of 192.168.100.1, the address used by Huawei fibre ONTs (HG8145V5 and similar).
• 192.168.1.254 vs 192.168.100.1 — both are real Huawei addresses, but for different products. The OptiXstar HG8141XR-10 FTTR Main Hub uses 192.168.1.254. The HG8145V5 ONT uses 192.168.100.1. Check the device label.
• huawei.local or huawei.com — not real router login URLs. Huawei does not provide an mDNS hostname like dlinkrouter.local or routerlogin.net. Use the IP address directly.
• mediarouter.home — this is the local hostname some carrier-supplied Huawei mobile hotspots redirect to. If your hotspot redirects there, follow the redirect; otherwise type 192.168.8.1 directly.

If your browser flags 192.168.8.1 as a search rather than navigating to the router, type http://192.168.8.1 with the explicit http:// prefix to bypass the search-bar guess.

Troubleshooting Huawei Router Login

1. Cannot reach 192.168.8.1. Confirm you are connected to the router’s network and not a different access point or mobile data. Open a command prompt and check your default gateway. On Windows, run ipconfig and look for the Default Gateway value. It should read 192.168.8.1. If it shows a different IP, you are connected to the wrong network.

2. Admin password rejected. If admin/admin does not work, the password was changed during setup or by your ISP. Try any password your ISP may have provided. If all else fails, perform a factory reset by holding the reset button for 10 seconds. This restores admin/admin credentials.

3. Page loads slowly or times out. Clear your browser cache and try a different browser. Disable any VPN or proxy software that might intercept local network traffic. If the issue persists on the router side, reboot the router by unplugging power for 10 seconds and plugging it back in.

4. Mobile hotspot login page does not appear. On mobile hotspots, the browser redirect to 192.168.8.1 sometimes fails on phones. Type the full URL http://192.168.8.1 manually in the address bar. Avoid searching for it in the search bar, which sends the query to a search engine instead.